A 2 post lift is a type of garage lift that is used for raising vehicles above the ground so that a mechanic can work in the space underneath. It is made up of two pillars that have sliding arms built into them. With a touch of a button the arms can be made to raise and lower, without the mechanic being in any danger of being crushed. A car or other vehicle can be driven onto the arms which double as ramp when it is on the ground.
2 Post Lift Kit
A 2 post lift kit typically consists of a control panel, hydraulic pump, fluid lines, and the lift apparatus itself. They are very easy to operate, and do not require a lot of maintenance. From starting on the ground to go to being fully raised takes about one minute on average.2 post lifts work on hydraulic principles, where a hydraulic pump supplies pressure to small pistons, which in turn can be made to extend or contract depending on the type of force applied.Typically in a 2 post car lift, electricity is used to drive the hydraulic pump, and a liquid such as oil is stored in the pistons. By pushing a button the pump can control the pressure of the oil , which makes the lift raise and lower.
Hydraulic technologies have a great safety record and a reputation for reliability, so they are very safe for mechanics to stand underneath while working.The average cost of a 2 post lift starts at around $1000, though depending on the make and weight rating it can be as much as $3,000. Most lifts support at least 7,000 lb which is more than enough to lift most cars, but the more expensive lifts can lift heavier vehicles such as SUV’s .
If you are looking for an automotive lift for your home garage, a 2 post lift is the way to go!
You may also enjoy:
